Can I Fit Mustang Wheels on My Crown Vic? Seeking Tips!

I’ve been thinking about upgrading the wheels on my Crown Victoria, and I’m really interested in putting some Mustang wheels on it. I’ve seen a few cars that have done this, but I’m unsure about the compatibility and what I need to make this work smoothly.

Wheel Compatibility

  • Bolt Patterns: What’s the bolt pattern for both Mustang and Crown Vic? Are there any adapters needed to make them fit?
  • Wheel Size: I hear Mustang wheels come in different sizes; what dimensions should I be looking for that won’t mess with the performance or clearance?

Aesthetic Considerations

  • Look and Style: How do Mustang wheels change the overall look of the Crown Vic? Are there specific styles or finishes that work better?
  • Wide vs. Narrow Wheels: Is it better to go wide or stick to something more narrow? What are the pros and cons?

Performance Impacts

  • Handling: Will changing to Mustang wheels alter the handling dynamics of the Crown Vic? I don’t wanna sacrifice comfort for style.
  • Suspension Issues: Are there any suspension mods needed? I’ve read stories of needing spacers or adjusting alignment when doing this kind of modification.

Personal Experiences

If anyone has succeeded in making this swap, I’d love to hear about your experiences. Any tips, pitfalls to avoid, or specific Mustang wheel models you’d recommend? Just looking to gather as much info as possible before I make a decision.

Thanks in advance for any insights you can share!

To fit Mustang wheels on a Crown Vic, you need to ensure the bolt pattern matches. Most Mustangs have a 5x114.3 pattern, just like the Crown Vic. However, wheel offset is crucial too. You’ll want an offset around 30-40mm for the best fit.

Thanks for the info! I was hesitant if the offset would work. So, you think anything in the 30-40mm range will be fine?

Absolutely, @jlarson! I’ve put Mustang wheels on my Vic, and the offset worked perfectly. Just make sure to check the width too; you don’t want them rubbing against the suspension.

4 Likes

What about the wheel width, @gjoyce? My friend warned me that going too wide could cause fitment issues.

Good point, @nicole56! Most Mustangs come with wheels that are 7-9 inches wide, which should fit fine. Just avoid going beyond 9.5 inches for the Crown Vic unless you’re ready for modifications.

1 Like

I think the biggest headache might be the tire size, don’t you? Anyone have experience balancing these tires on a Vic?

8 Likes

In terms of tire size, I’ve used 255/50 R18 tires with my Mustang wheels, and they fit quite well without rubbing.

1 Like

That’s helpful, @sherryyork! I’ve seen some people go with wider tires, but it must be a balancing act to stay within limits, right?

Definitely! If you push too wide or too big, it gets dicey. Honestly, who knew fitting wheels could be such a project? Didn’t expect a tire fitting class!

Lol @kristen05! It does feel like we need an instruction manual sometimes! But it’s a fun project if you get it right.

What’s the process if they start rubbing? Is there a common fix for that?

If they rub, you can adjust the wheel offset or roll the fenders slightly, @wday. It’s not too tough, just take your time, and you’ll be golden!

Installing Mustang wheels on a Crown Vic can definitely change how your ride feels. The offset might differ, which can impact handling. Make sure to check for clearance issues too!

8 Likes

Totally agree! I swapped wheels and noticed better cornering, but the ride was a bit stiffer. Just depends on your setup!

I’ve seen a few guys do this conversion, but you should pay attention to the wheel size. It can drastically alter your speedometer readings as well!

4 Likes

Good point! Would a 17-inch wheel make a noticeable difference in handling vs. sticking with 16s?

3 Likes

In my experience, the handling improved quite a bit with 18s instead of stock. Just keep the tire profile in mind to avoid rubbing issues on bumps.

1 Like

Also, don’t forget about the aesthetic! Mustang wheels can give your Crown Vic a sportier look. Anyone done a before-and-after comparison?

I think the visual upgrade is huge! My buddy did a swap and everyone commented on how nice his Crown Vic looked afterward.