Exactly! It’s a straightforward step, but often overlooked. Who knows, you might find a simple fix!
1 Like
When checking fuses, be sure to use a multi-meter or a fuse tester for accuracy. It’s a simple tool that will help you confirm if the fuse is really blown.
And if you’re comfortable, it might be worth taking apart the wiper control switch to inspect it. Sometimes debris can cause it to malfunction!
Good point! It’s surprising how dirt and grime can affect electrical components. Clean it up carefully if you go that route.
Don’t be discouraged! Troubleshooting can feel overwhelming, but each step can bring you closer to the solution. Just take your time and double-check everything.
7 Likes
What if the problem persists even after checking these? Should I be looking at the motor next? Seems a bit daunting!
Yes, the motor could be the culprit if all else fails. Testing for power at the wiper motor while activating the switch can help diagnose if it’s the issue.
A little humor! I guess we could always resort to using a bucket and a sponge if nothing works? Just kidding, but nonetheless, good luck with the troubleshooting!
Haha! While that sounds like a creative solution, let’s hope you fix it without that! Keeping the humor alive helps, though.
Reflecting on my own experience, my wipers had a similar issue, and it turned out to be a bad relay. Checking relays might be another step to consider.
That’s interesting! I wouldn’t have thought of that. I’ll definitely add checking relays to my troubleshooting checklist.
1 Like
Overall, the troubleshooting process may take some time, but staying organized can really help. Create a list of checks to ensure you don’t skip any steps!
5 Likes
Sounds like a classic case of a faulty wiper relay or motor. Often, it can be just a loose wire connection. Parts might cost you around $30-$100, and if you DIY, it could save you a hefty labor cost!
I’ve had a similar issue! Sometimes it’s just the switch that’s gone wonky. If you’re up for it, replacing the switch yourself can be straightforward with just some basic tools.
4 Likes
In my experience, it’s usually the wiper motor that’s at fault when this happens. Expect around $200 if you take it to a shop, given both parts and labor. DIY could be half of that if you’re handy!
4 Likes
That’s a good point. Just yesterday, my friend had this issue and the mechanic found a short in the wiring—sometimes it’s not just the obvious parts! Costed her $150 to fix.
Don’t forget to check the fuses! A blown fuse can cause weird things to happen with your wipers, and it’s often an overlooked quick fix. If that’s the problem, it could be under $10.
Definitely check the fuses first! Also, if you’re comfortable with a little disassembly, you could clean the connections to the motor. Makes a huge difference sometimes!
8 Likes
Fuses are critical! If you’re DIYing, slow and steady wins the race. A quick YouTube tutorial can be your best friend here!
6 Likes
Yikes! If only the high speed works, that sounds less serious than it could be. Sometimes the wiper speed control module is the culprit; maybe $50-$150 for parts there. DIY guide may be tricky!